DC Buyer's Guide

Accessories and Modifications CD180AT through CD6900

ITEM

DESCRIPTION

25 SHAFT GROUNDING BRUSH A shaft grounding brush is recommended to minimize possible bearing failures caused by shaft voltages. It is mounted externally on the drive end of CD218AT-CD5010AY frames (which reduces usable drive end shaft length by approximately 1 inch) and is mounted internally on the drive end of CD6000-CD6900 frames. Note: The shaft grounding brush and labyrinth seal are furnished as standard with papermill features.

Motor Pricing General Information

Motor Frame Size

List Price Addition

N/A on C-face, D-flange or P-base motors. Use TACH options. Price addition includes labyrinth seal on CD218AT-CD5010AY frames. See page 3.18, Item 22 for labyrinth seal on CD6000-CD6900 frames.

CD180AT CD210AT

Not Available

$1448 $1676 $2024 $1186

CD250AT-CD320AT CD360AT-CD5010AY

CD6000-CD6900

26 SPACE HEATERS

Note: Furnished as standard with crane duty feature Space heaters are installed inside the machine with leads brought out through the standard conduit box. Single phase AC and DC ratings available are 120, 240, and 480 Volts on frames CD180AT-CD6900. Refer to Wolong for higher voltage.

Motor Frame Size CD180AT-CD210AT CD250AT-CD320AT CD360AT-CD5010AY

Wattage

List Price Addition

30 75

$582 $582 $582

Other Information Application Information Outline Dimensions Accessories and Modifications

180 500

CD6000-CD6100 CD6200-CD6900

$1658 $1658

1000

27 SPEED LIMIT DEVICE Provides for addition of calibrated speed limit device (non-adjustable on frames CD508AT and below and adjustable on frames CD5010AY and above) for motor over speed protection when connected in proper circuit. The device is flange mounted on the commutator end of the motor. Contact will be normally closed on frames CD508AT and below. On frames CD5010AY and above, both normally open and normally closed contacts are provided. The device will be set at the factory to operate at 13-17% above the top rated speed. For special limiting speed, refer to Wolong . Note: Non-adjustable speed limit devices are not recommended for crane duty use. If adjustable speed limit switch is required on frames CDL182AT-CD508AT, refer to Wolong .

MOTOR FRAME SIZE CD182AT-CD508AT CD5010AY-CD6900 List Price Addition

SPEED LIMIT DEVICE

a. Speed limit device (mounted) b. Speed limit device (mounted) with double shaft extension

$2534

$5982

Refer to Wolong

$5982

c. Euclid speed switch

$7646

$8480

Speed Limit Devices are available on all frames with a single or double shaft extension. (Frame CD5010AY shown above with double shaft extension.)

3.21

www.wolongamerica.com

GEP387-EN 07/19 Prices and data subject to change without notice.