DC Buyer's Guide

Frames L182ATD to 189ATD Type D-Flange Mounting with Feet

Dripproof Fully Guarded and Totally Enclosed Nonventilated Type CD

DIMENSIONS - For ESTIMATING ONLY unless endorsed for construction

COMMUTATOR END

11.00 MAX.

C

AG

1.44

8.88

1.44

.70

BV

45°

1

1

Motor Pricing General Information

2.25

ACCESSORY MOUNTING FACE

22.5°

.5312 (4) HOLES EQ. SP.

.23

CONDUIT HOLE

.75 NPT FOR CONDUIT

KEY .25 X .25 X 1.38 LG

.45

R5.20

BS

2.00

10.00

3

8.94

2

9.000 8.997

R4.92

.12

4.50 4.47

1.1250 1.1245

1.50

2.00

.38

3.75

.4062 (4) HOLES

2.75

8.90 MAX. 7.50

2F

2.37

B MAX

Other Information Application Information Outline Dimensions Accessories and Modifications

Mounting face will be square and rabbet diameter concentric with shaft within .004 inch total indicator reading. Shaft runout not to exceed .002 inch total indicator reading. The standard single shaft machine has the commutator end bearing bracket and shaft extension prepared to accept accessories. For additional information, see page 4.48.

 Splashproof fully guarded machines will have additional covers, increasing the overall width at the commutator end and drive end side air openings.  Dripproof, fully guarded vertical drive end shaft down machines will have additional covers, increasing the overall width and exceeding bottom of mounting feet at the commutator end openings. ‘ Represents minimum length of shaft available for hubs.

Approx. Wk² of Arm. Lb. Ft.²

Approx. Net Wt. Lbs.

Frame

B

C

2F

AG

BS

BV

L182ATD 186ATD L186ATD 189ATD

0.28 0.45 0.67 0.77

5.80 8.30 8.30

15.26 16.76 18.76 20.76

4.50 7.00 7.00

13.01 14.51 16.51 18.51

6.63 8.13

9.38

82

10.88 12.88 14.88

104 130 164

10.13 12.13

11.56

10.00

4.5

www.wolongamerica.com

GEP387-EN 07/19 Prices and data subject to change without notice.