DC Buyer's Guide

Blower Unit, Commutator End Mounted Frames 500AT

Type CD

DIMENSIONS - For ESTIMATING ONLY unless endorsed for construction

DIMENSIONS IN INCHES

Type CD Frame

Approx. Net Wt. in Lb.

XA

XB

XD XE Fig. 1 XE Fig. 2

CD500AT

83

43.05

30.55

32.58

22.95

8.35

Modifications Motor Pricing General Information From 36A167799GK

DIMENSIONS IN INCHES

Type CD Frame

XJ

XK

XM

XS

XT

XF

CD500AT

15.17

20.36

6.47

15.65

1.25

20.43

Frame

Blower Motor Conduit Hole

CD500AT

1.09" Diameter Hole in Blower Motor CND Box

NOTE: The required air flow is obtained only when the blower motors are operated in the correct direction of rotation. When facing the air inlet , the blower wheel should rotate counterclockwise. Check the blower motor for correct direction of rotation by running it in both directions and observing the quality of air discharged. The direction of rotation which gives the greatest air flow is the correct one. Blower motors can be reversed by interchanging the external connections to any two of three line leads.

FIGURE 1 TOP MOUNTED

Accessories and

FIGURE 2 SIDE MOUNTED RIGHT HAND SIDE FACING COMMUTATOR END

From 36A167799GN

Information Outline Dimensions

Application

FIGURE 3 SIDE MOUNTED LEFT HAND SIDE FACING COMMUTATOR END

Other Information From 36A167799GL

4.28

www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.