DC Buyer's Guide

Field Modification Kits Frames CD180AT to CD5010AY

Custom Modification Kits

exception of totally enclosed fan cooled (TEFC) machines. Tach adapters are made of cast iron and are supplied with appropriate covers. Refer to GE for mounting of tachometer kits on TEFC motors. Note: Type BC and Type PY tachometers must be ordered independently of the tachometer kits less tachometer. Type C-Face Endshield Kits Type C-Face endshield kits are designed for mounting on the fully guarded or totally enclosed nonventilated (TENV) frames listed below. Addition of Type C-Face endshield kits requires machine disassembly by a qualified service facility. For frames CD218AT-CD2010AT, refer to factory.

Modifications Motor Pricing General Information Custom modification kits allow modification of Kinamatic™ motors which have been shipped from the factory. They are designed for maximum flexibility and ease of installation, and are stocked by authorized GE parts distributors to provide immediate availability. The quick kit reference on the following pages lists the numbers of the most commonly used accessory kits and modification by frame size. Field modification kits cannot be mounted on all frame sizes or enclosures. Please review the application information carefully to determine availability. Contact GE (phone number available on page 6.4 of this document) or your GE parts distributor for kit prices. The information given is not to be used for new motor specifications. Application Information Blower Kits Blower kits are designed for standard mounting on the motor commutator end and for addition only to dripproof fully guarded, separately ventilated motors. Blower motors are 230/460 volt AC, 3 phase, 60 Hertz. To properly mount a blower kit on CD180AT frames, drilling and tapping of three

Frame Series

Standard C-Face Dimension (in inches)

CDL182AT-CD259AT CD287AT & CD288AT

8.5

10.5 12.5

CD327AT, CD328AT, CD329AT

Sliding Bases Sliding bases are suggested as a convenient means for adjusting belt tension or may be used as mounting plates. (For horizontal mounting only — not available for ceiling or sidewall mounting. Sliding bases not available on CD6000 frames and above.) Lexan ® Covers Lexan covers are suggested as a convenient means of viewing brush rigging and brushes. Not available on frame sizes CDL182AT-CD189AT.

Accessories and

holes is required. Tachometer Kits

Tachometer kits are designed to be mounted on motors with an accessory comm end shaft extension of any fully guarded or totally enclosed Kinamatic motor, with the

Information Outline Dimensions

AN-AC TACH 45/90V/1000RPM (INCLUDES TACH) 36A167702AAG01 36A167702BAG01 36A167702CAG01 36A167702DAG01

PY TACH KIT LESS TACH

BC TACH KIT LESS TACH

Frame Series

CDL182AT-CD329AT CD365AT-CD368AT CD407AT-CDL409AT CD504AT-CD5010AY

36A167701AAG01 36A167701BAG01 36A167701CAG01 36A167701CAG14

36A167700AAG01 36A167700BAG01 36A167700CAG01 36A167700CAG01

Application

*Bi-directional, dual output .

AN-DG240L3 240 PPR ONE OUTPUT

AN-DG240L4 240 PPR DUAL OUTPUT

AN-DG600L3 600 PPR ONE OUTPUT

AN-DG600L4 600 PPR DUAL OUTPUT

Frame Series

CDL182AT-CD329AT CD365AT-CD368AT CD407AT-CDL409AT CD504AT-CD5010AY

36C706050DA001 36C706050AB001 36C706050AB002 36C706050AB003

36C706050DB001 36C706050AB001 36C706050AB002 36C706050AB003

36C706050DC001 36C706050AC001 36C706050AC002 36C706050AC003

36C706050DD001 36C706050AD001 36C706050AD002 36C706050AD003

Other Information

6.2

www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.