DC Buyer's Guide

Accessories and Modifications CD180AT through CD6900

ITEM

DESCRIPTION

5 Cont’d Improved balance vibration limits (applies to listed ratings only). For other speed ranges, refer to GE. Precision balance is not available on CD180AT, CD6000-CD6900 frames, nor explosionproof motors.

Frame Size

CD210AT-CD280AT

CD320AT-CD360AT

CD407AT-CD5010AY

Motor Pricing General Information

PEAK-TO-PEAK AMPLITUDE (INCHES)

Precision balance limits at top speed

0.0002

0.0003

0.0004

MOTORS LIST PRICE

Up to $2500

$2501 to $3592

$3593 to $5578

$5579 to $9748

$9749 to $13218

$13219 to $23922

$23923 to $42136

$42137 to $61750

$61751 to $98628

$98629 and up

Description

List Price Addition

Precision Balance

Not Available

$1338 $1582 $2094 $2688 $3210 $4564 $5490 Not Available

6 BASES For P-Base see Endshields, Page 3.16. 6a Standard Sliding Base Sliding bases are suggested as a convenient means for adjusting belt tension or may be used as mounting plates. (For horizontal mounting only — not available for ceiling or sidewall mounting.) (Not available on CD6700 through CD6900 frames) 6b Transition Base Transition bases may be used to match the mounting dimensions of another motor which has a larger “D” dimension. (A drawing must be provided at the time of order.) This option is available if, and only if, the shaft height of the older motor is reasonably higher (varies with motor size, but typically greater than 1 inch is sufficient) than the shaft height of the Kinamatic™ motor at the same rating. For horizontal floor mounting only. Refer to Replacement Motors/Mechanically interchangeable section on page 1.7 for additional details. A special shaft extension may be required. 6c Sole Plate Sole plates are two (2) flat steel plates to be mounted in concrete by the customer to provide a mounting surface for the motor. Refer to pages 4.63 – 4.65 for outlines.

Other Information Application Information Outline Dimensions Accessories and Modifications

MOTOR LIST PRICE

$2501 to $3592

$3593 to $5578

$5579 to $9748

$9749 to $13218

$13219 to $23922

$23923 to $42136

$42137 to $61750

$61751 to $98628

$98629 to $157704

$157704 to $252288

$252289 to $403650

$403651 and up

Up to $2500

Description

List Price Addition a. Standard Sliding Base $316 $316 $316 $540 $630 $1216 $1600 $2160 $2860 $3844 $6154

Contact GE

b. Transition Base

$700 $810 $944 $1260 $1700 $2300 $3100 $4160 $5560 $7440 $10022 $13724 $18070 $630 $630 $630 $870 $1110 $1530 $2090 $2760 $3750 $5026 $6760 $9150 $12300

c. Sole Plate

3.3

www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.