DC Buyer's Guide

Accessories and Modifications CD180AT through CD6900

ITEM

DESCRIPTION

29b Cont’d

MOTOR FRAME SIZE

MOTOR MOUNTED, DIRECT CONNECTED TACHOMETERS

CDL182AT- CD5010AY

CD6000- CD6900

MODEL NUMBER AND DESCRIPTION

List Price Addition OUTLINE PAGE 4.56

Environmental Rating

Modifications Motor Pricing General Information

NorthStar SLIM Tach ® SL85 (formerly LakeShore)

<^d]cb ^] ' $ PRRTbb^ah U[P]VT =^ QTPaX]Vb R^d_[X]Vb ^a adapters needed. Magnetoresistive sensors, ductile iron enclosure, polymer rotor and industrial connector. For through shaft or end of bWPUc \^d]cX]Vb cWT B;8< CPRW B;'$ RP] UXc d_ c^ P " &$ SXP\TcTa shaft . Approx. half the thickness of the RIM 8500. The SL85 does not have replaceable sensor modules. Through shaft models are also PePX[PQ[T U^a bWPUcb aP]VX]V Ua^\ $ cWa^dVW " &$ X] SXP\TcTa 64, 128, 256, 512, 1024 pulses/revolution, single output

Heavy Industrial Industrial Applications with

temperatures between -40°C and +80°C, chemical resistance include salt spray, most solvents, mild acids and bases. SL85 can be used in a Mill Duty environment .

$2362 $4061 $2530

N/A N/A N/A

64, 128, 256, 512, 1024 pulses/revolution, dual output

2048 pulses/revolution, single output

NorthStar SLIM Tach HS56 (formerly LakeShore)

OUTLINE PAGE 4.57

Hollow shaft design allows for mounting when an accessory flange is not available. Mounts on a standard shaft extension or stub shaft . Magnetoresistive sensors, polymer rotor and industrial connector. B;8< CPRW 7B$% RP] UXc d_ c^ P !$ SXP\TcTa bWPUc 64, 128, 256, 512, 1024 pulses/revolution, single output

Industrial Duty Industrial Applications with temperatures between -20°C and +80°C, chemical resistance include salt spray, most solvents, mild acids and bases.

$2606 $3821 $2770 $4152

$2867 $4203 $3048 $4567

Accessories and

64, 128, 256, 512, 1024 pulses/revolution, dual output

2048 pulses/revolution, single output 2048 pulses/revolution, dual output

Notes: NorthStar RIM Tach 8500 NexGen can not be mounted on CD180AT-CD320AT frames with a TEFC enclosure. Use a TENV or TEAO enclosure. The NorthStar RIM Tach 1250 NexGen, 6200 NexGen and SLIM Tach SL85 and HS56 all have sealed electronics to prevent contaminant intrusion. Shaft grounding brush, add $2232 list to the above prices. All items listed above are CE approved. (ppr) pulses per revolution, required at time of order Dynapar HA625 Encoder OUTLINE PAGE 4.58 Heavy Industrial Industrial Applications with temperatures between 40°C and +80°C. Flange mounted Tach, 5-26 VDC input , push-pull and differential line driver, 5-26 VDC, single output , NEMA 4/IP66 sealed enclosure, side mount MS style connector (10 pin mating connector included) over voltage protection, output short circuit protection, and reverse voltage protection, 85°C operating temperature, CE labeled. 240, 512, 600, 1024, 1200, 2048 pulses/revolution $1392 $1532

Information Outline Dimensions

Dynapar H56 Rotopulser

OUTLINE PAGE 4.59

(Replaces the 62P) 56C face mounted tach (mounts same as BC series tachs). Heavy mill duty enclosure, 5-26 VDC input , push-pull and differential line driver, 5-26 VDC, single output , pluggable screw terminals (Industrial connectors) mating connector(s) included. 240, 512, 600, 1024, 1200, 2048 pulses/revolution, single output 240, 512, 600, 1024, 1200, 2048 pulses/revolution, dual output

Heavy Mill Duty Industrial Applications with temperatures between -40°C and +80°C NEMA 4/IP66 enclosure. Suitable for severe duty in paper, steel and lumber mills.

Application

$3536 $3951

$3890 $4346

Notes: The HA625, H56 and X25 require a Tach mounting kit . (Tach mounting kit consists of Tach adapter, coupling and stub shaft). The H56 can also be foot mounted. The HA625, H56 and X25 can not be mounted on CD180-CD210 TEFC motors. Use TENV enclosure. (ppr) pulses per revolution, required at time of order

Other Information

3.28

www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.