DC Buyer's Guide
Frames L182ACY to 189ACY 4.5” Type C-Face Mounting with Feet
Dripproof Fully Guarded and Totally Enclosed Nonventilated Type CD
DIMENSIONS - For ESTIMATING ONLY unless endorsed for construction
COMMUTATOR END
C
AG
2.12
9.24 DRIVE END COVER
8.88
BV
Motor Pricing General Information
.12
22.5°
.70
.375-16 THREAD MINIMUM THREAD
1
.14 MAX.
CONDUIT HOLE
ENGAGEMENT .50; MAX BOLT PENETRATION .62- (4) HOLES, EQUALLY SPACED
1
ACCESSORY MOUNTING FACE
1.44
2.00
BS
1.44
R5.20
.75 NPT FOR CONDUIT
3
KEY .1875 X .1875 X 1.38 LG
6.50
5.88
8.94
8.82 MAX.
4.500
2
4.497
.12
R4.92
4
.8750 .8745
4.50 4.47
45°
4
1.50
(4) HOLES .4062 DIA.
.13
2.00
.38
3.75
2F
2.75
7.50
2.25
B MAX
8.90 MAX.
Mounting face will be square and rabbet diameter concentric with shaft within .004 inch total indicator reading. Shaft runout not to exceed .002 inch total indicator reading. The standard single shaft machine has the commutator end bearing bracket and shaft extension prepared to accept accessories. For additional information, see page 4.48.
Splashproof fully guarded machines will have additional covers, increasing the overall width at the commutator end and drive end side air openings. Dripproof, fully guarded vertical drive end shaft down machines will have additional covers, increasing the overall width and exceeding bottom of mounting feet at the commutator end openings. Represents minimum length of shaft available for hubs. Air openings for dripproof fully guarded. Totally enclosed machines will not have openings.
Other Information Application Information Outline Dimensions Accessories and Modifications
Approx. Wk² of Arm. Lb. Ft.²
Approx. Net Wt. Lbs.
Frame
B
C
2F
AG
BS
BV
L182ACY 186ACY L186ACY 189ACY
0.28 0.45 0.67 0.77
5.80 8.30 8.30
15.26 16.76 18.76 20.76
4.50 7.00 7.00
13.14 14.64 16.64 18.64
6.63 8.13
9.51
80
11.01 13.01 15.01
102 128 162
10.13 12.13
11.56
10.00
4.3
www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.
Made with FlippingBook Online newsletter creator