DC Buyer's Guide

Frames 365AT TO 5010AY Conduit Box Dimensions

Dripproof Fully Guarded*, Splashproof and Totally Enclosed Nonventilated

Type CD

DIMENSIONS - For ESTIMATING ONLY unless endorsed for construction

CONDUIT BOX DIMENSIONS

DIMENSIONS IN INCHES

AA=4"

AA= Blank

AA=(2) 4"

AA=4"

AA=(2) 4"

AA= Blank

AA=3"

Motor Pricing General Information

Frame 365AT 366AT 368AT 407AT L407AT 409AT L409AT

BS

BV

BS

BV

BS

BV

BS

BV

Frame

BS

BV

BS

BV 19

BS

BV

9.020 11.22 14.22

14.9 17.1 20.1

9.020 11.22 14.22

14.9 17.1 20.1

6.640 8.840 11.84

12.52 14.72 17.72

- - - -

- - - -

504ATD 13.26

21.38

10.88

10.88 11.16 14.88 15.16 19.88 20.16

19.00 19.28 23.00 23.28 28.00 28.26

L504ATD

-

-

-

-

506ATD 17.26

25.38

14.88

23

-

-

-

-

-

-

L506ATD

-

-

-

-

15.18

21.8

15.18

21.8

12.80

19.42

12.8

19.42

508ATD 22.26

30.38

19.88

28

-

-

-

-

-

-

-

-

L508ATD

-

-

-

-

19.68

26.3

19.68

26.3

17.30

23.92

17.3

23.92

DIMENSIONS IN INCHES

Frame AA= Blank 13.38" X 13.31" Available Drill Space AB AC AE AF XL XN AB AC AE AF XL XN AB AC AD AE AF XL XN AB AE AF XL XN 360AT 16.08 12.33 9.000 6.44 10.12 7 17.82 13.20 9.00 8.5 13.5 8.62 18.72 14.97 3 9.000 6.75 13.5 13.5 Not Available 400AT 17.47 13.72 12.95 6.44 10.12 7 19.22 14.60 12.95 8.5 13.5 8.62 20.12 16.37 3 12.96 6.75 13.5 13.5 24.76 12.95 6.75 13.5 13.5 500AT Not Available 21.70 17.08 16.10 8.5 13.5 8.62 22.60 18.85 3 16.10 6.75 13.5 13.5 27.18 16.10 6.75 13.5 13.5 L500AT Not Available Not Available 27.18 15.70 8.75 13.5 13.5 5010AY 21.94 17.32 16.10 8.5 13.5 8.62 22.84 19.09 3 16.10 6.75 13.5 13.5 27.42 16.10 6.75 13.5 13.5 AA=3" AA=4" AA=(2) 4"

Conduit box will be assembled on the right hand side facing the commutator end for motors, and on the left hand side facing the commutator end for generators. Conduit box will be assembled on opposite side of frame, if so specified. Conduit box may be oriented to accommodate customers’ application. Dimensions pertaining to conduit boxes vary according to rating. Refer to Wolong for dimensions. The standard single shaft machine has the commutator end bearing bracket and shaft prepared to accept accessories . For additional information, see page 4.48. Commutator end shaft extension is furnished only when specifically ordered, and is prepared for accessory drive. Mounting face will be square and rabbet diameter concentric with shaft within 0.007 inch total indicator reading. "AK" dimensions: +0.000 inch -0.005 inch. ’ For shipping weight add 15% to net weight .

* Dripproof, fully guarded machines can be used for wall or ceiling mounting Assembly modifications must be made to maintain proper enclosure. ‡ Dimensions "D" will not be exceeded. When exact dimension is required, shims up to .03 inches may be necessary where dimension "D" is 8 inches or less. When dimension "D" is over 8 inches, shims up to .06 inch may be necessary. Splashproof machines will have additional covers, increasing the overall width at the commutator end and drive end side cover openings. Δ “V” represents minimum length of shaft available for hubs. Shaft diameters 1.5 inches and smaller will come within the limits of +0.0000 inch -0.0005 inch. Diameters larger than 1.5 inches will come within the limits of +0.0000 inch -0.0010 inch. Shaft runout on diameters 1.625 inches and smaller shall not exceed .002 inch indicator reading. Diameters larger than 1.625 inches shall not exceed .003 inch indicator reading.

Other Information Application Information Outline Dimensions Accessories and Modifications

From 36C697106DA

4.17

www.gemotorswolong.com GEP387-EN 07/19 Prices and data subject to change without notice.