Standard Motor Catalog

Application Considerations

CONSIDER LIFECYCLE OPERATING COSTS FIRST The initial cost of an electric motor makes up 5% or less of the total cost of operation. So all aspects of the motor operation should be considered when purchasing motors.

ENGINEERING REQUIREMENTS

LOW VIBRATION MEANS LONG LIFE Vibration is bad for motors and driven equipment. Motor bearings, in particular, begin to wear faster with high vibration levels. Beyond focusing on proper alignment, base, and voltage, users should also pay more attention to the design of the motor itself. In most cases, manufacturers are content to simply stay within the NEMA or IEEE standards because many engineers, of course, specify these limits.

Each petroleum, chemical, power generation, pulp/paper, mining, metal, mineral, water/wastewater, and general process application has unique torque, speed, voltage, enclosure, temperature, and industry standard requirements that must be designed into motors.

Purchase Price (5% or less)

Purchase Price (5% or less)

0.15

Pumps

Compressors

Motor Vibration Velocity (in/sec peak) 0.15

Motor Vibration Velocity (in/sec peak)

Lifecycle Operating Costs

Lifecycle Operating Costs

Blowers Heat Exchangers

Energy Consumption Ease of Maintenance Environmental Impact System Criticality

Energy Consumption Ease of Maintenance Environmental Impact System Criticality

0.08

0.075

Mixers

Conveyors

0.08

MISC.

Engineered to address the common causes of motor failure

0.075

0.04

MISC.

Crushers

Augers

BEARINGS

WINDINGS

Engineered to address the common causes of motor failure

Ultra Series Vertical

XSD Ultra Horizontal

NEMA MG1 Standard

IEEE 841 Standard

Heat Load Inverters

Heat Vibration

0.04

We also have the expertise to diagnose the mechanical and electrical requirements for special applications and custom engineer designs as they warrant. Contamination Voltage Issues Misalignment Contamination Lubrication Issues Electrical Discharge Stress, Load, Fatigue

Ultra Series Vertical Since bearing wear is one of the leading causes of motor failure, reducing its chances reduces your unplanned downtime. Our application engineers have been told by many users that their driven equipment tends to run smoother with low vibration motors. All of this leads to lower maintenance costs on the entire drive system. XSD Ultra Horizontal It is well documented that motors designed with low vibration have longer bearing life.

BEARINGS

WINDINGS

NEMA MG1 Standard

IEEE 841 Standard

Heat Load Inverters

Heat Vibration

Misalignment Contamination

Contamination Voltage Issues

Lubrication Issues Electrical Discharge Stress, Load, Fatigue

06

Data subject to change without notice. 02/23 • www.gemotorswolong.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online