Standard Motor Catalog

Section MV High Power Motors

Quantum ™ LMV—TEFC Dimensions

Dimensions refer to drawings on following page

Frame 500, Totally Enclosed Fan Cooled

Shaft

Mounting

Keyway

Key Length N-W U 1

Width Depth

E H BA 2F 2XF

Frame

V 2

A B C D 3

G J K L O P

507SS 0.625 0.313 3.50 5.50 2.625 5.25 10.00 1.07 8.50 25.00 22.00 23.00 31.90 63.63 12.50 1.35 7.09 8.36 37.88 30.80 30.45 508SS 507SLL 0.750 0.375 4.00 5.75 2.875 5.50 10.00 1.07 8.50 25.00 22.00 23.00 31.90 64.13 12.50 1.35 7.09 8.36 37.88 30.80 30.45 508SLL 507SL 1.000 0.500 8.00 9.50 4.000 9.25 10.00 1.07 8.50 25.00 22.00 23.00 31.90 67.88 12.50 1.35 7.09 8.36 37.88 30.80 30.45 508SL 508L 1.000 0.500 10.00 12.00 3.875 11.50 10.00 1.07 8.50 28.00 25.00 23.00 31.90 72.39 12.50 1.35 7.09 8.36 37.88 30.80 30.45 509L 508LL 0.875 0.438 5.00 6.75 3.375 6.50 10.00 1.07 8.50 28.00 25.00 23.00 31.90 67.14 12.50 1.35 7.09 8.36 37.88 30.80 30.45 509LL 508LS 0.625 0.313 4.00 5.75 2.625 5.50 10.00 1.07 8.50 28.00 25.00 23.00 31.90 66.14 12.50 1.35 7.09 8.36 37.88 30.80 30.45 509LS 5010L 1.000 0.500 10.00 12.00 3.875 11.50 10.00 1.07 8.50 36.00 32.00 23.00 39.90 80.39 12.50 1.35 7.09 10.00 41.88 30.80 30.45 5011L 5010LL 0.875 0.438 5.00 6.75 3.375 6.50 10.00 1.07 8.50 36.00 32.00 23.00 39.90 75.14 12.50 1.35 7.09 10.00 41.88 30.80 30.45 5011LL 5010LS 0.625 0.313 4.00 5.75 2.625 5.50 10.00 1.07 8.50 36.00 32.00 23.00 39.90 74.14 12.50 1.35 7.09 10.00 41.88 30.80 30.45 5011LS 5012S 1.000 0.500 5.50 7.75 3.875 7.50 10.00 1.07 8.50 45.00 40.00 23.00 48.90 85.14 12.50 1.35 7.09 10.00 46.38 30.80 30.45 5013S 5012ST 0.750 0.375 4.00 5.75 2.875 5.50 10.00 1.07 8.50 45.00 40.00 23.00 48.90 83.13 12.50 1.35 7.09 10.00 46.38 30.80 30.45 5013ST

ABOVE NEMA AC HORIZONTAL MOTORS

Conduit Box Dimensions

Approx. Volume

Max. FL Amps 4

AA

AB

XL

XN

R

Frame

400 600

1260 2500 5700

2-4.00 2-4.00 3-3.00

22.67 22.98 28.83

12.39 14.50 22.25

16.25 23.95 22.25

35.14 35.63 41.30

507-5013

1200

Notes: 1 Tolerance on “U” dimension will be +0.000 inch - 0.001 2 Dimension “V” represents length of straight part of shaft extension 3 Tolerance on “D” dimension will be + 0.000 inch - 0.060 inch 4 Conduit box size is determined by full load amps

Providing mounting conditions permit, conduit box may be turned so that entrance can be made upward, downward or from either side

MV.19

Data subject to change without notice. 03/24 • www.wolongamerica.com